Skip to the patterns
EVERY CROCHET

Tech Accessories 12 rounds No account, no download

Striped crochet sleeve cover for headset accessories

A sport-weight striped sc/dc crochet sleeve cover for headset accessories, worked flat in US crochet terms and seamed into a tube.

Striped crochet sleeve cover for headset accessories
Skill
Beginner to Easy
Time
2-3 hours
Yarn weight
Sport
Hook
3.5 mm

Beginner to Easy

What the original write-up called it. Nothing here is graded again.

Sport

What the sample was worked in. Any weight works; the size moves with it.

2-3 hours

What the original page reckoned. Your own pace is the one that matters.

About this pattern

This is a small striped crochet sleeve made to cover a headset or earphone section, worked flat as a rectangular panel in sport weight cotton using alternating single crochet and double crochet, then folded and seamed into a tube. It uses two colours, a 3.5 mm hook, and finishes at roughly 4 by 2 inches (10 by 5 cm), making it a quick project suited to leftover yarn.

This project is a small striped sleeve designed to dress up a headset or headphone section rather than a garment or toy. The fabric is built from an alternating single crochet and double crochet sequence (worked in US crochet terms), which gives the surface a slightly raised, basket-like texture while still allowing the piece to stretch enough to fit over a rounded shape. The colour change midway through the panel produces the yellow-and-white striping visible in the finished cover.

Rather than working stitches directly around the headset, the panel is made flat in rows, starting from a foundation chain and building up through the textured stitch pattern. Once the rectangle reaches the required length, it is folded and seamed into a tube, which is then slipped over the headset section. Working flat first means the width and length can be checked against the actual device before any seaming is done.

Materials

  • A smooth yarn with good stitch definition works best for this crochet headset accessory. A lightweight cotton yarn is suggested because it creates a durable cover that holds its shape and can handle regular use. Acrylic or cotton blends may also work well.
  • The visible design suggests a medium-light crochet fabric rather than a thick bulky texture. A recommended range is sport weight or light DK yarn with a hook size that creates a firm but flexible fabric.
  • Sport weight cotton yarn in Color A (yellow) and Color B (white), approximately 25 yards (23 meters) total
  • 3.5 mm US E-4 crochet hook
  • Yarn needle
  • Scissors
  • Measuring tape
  • Optional stitch marker

The list is the pattern's own wording.

Instructions

Every round is printed as the pattern wrote it, brackets and all. Open the key beside a round to see only the short forms that round uses.

Main Panel

Note This pattern creates one base size. Measure your headset area and adjust the starting chain if a longer or wider sleeve is needed.

  1. Row 1

    With Color A, ch 22. Sc in second ch from hook and across. Turn. (21 sts)

    Key2
    ch
    chain
    sc
    single crochet
  2. Row 2

    Ch 1, sc in first st, dc in next st, repeat sc and dc pattern across. Turn. (21 sts)

    Key4
    ch
    chain
    sc
    single crochet
    dc
    double crochet
    st
    stitch
  3. Row 3

    Ch 1, work the same alternating stitch pattern across. Turn. (21 sts)

    Key1
    ch
    chain
  4. Row 4

    Change to Color B. Ch 1, continue alternating sc and dc across. Turn. (21 sts)

    Key3
    ch
    chain
    sc
    single crochet
    dc
    double crochet
  5. Row 5

    With Color B, repeat Row 4. Turn. (21 sts)

  6. Row 6

    Change to Color A. Repeat stitch pattern across. Turn. (21 sts)

  7. Row 7

    With Color A, repeat stitch pattern across. Turn. (21 sts)

  8. Row 8

    Change to Color B. Repeat stitch pattern across. Turn. (21 sts)

  9. Row 9

    With Color B, repeat stitch pattern across. Turn. (21 sts)

  10. Row 10

    Change to Color A. Repeat stitch pattern across. Turn. (21 sts)

  11. Row 11

    Repeat stitch pattern across. Turn. (21 sts)

  12. Row 12

    Ch 1, sc across. Fasten off and leave a long tail for sewing. (21 sts)

    Key2
    ch
    chain
    sc
    single crochet

Special Stitch

Textured Stitch Pattern: Work alternating stitches across the row: sc in the first stitch, dc in the next stitch. Continue alternating across the row. This creates a slightly raised texture similar to the visible handmade fabric style.

Optional Edging

For a more finished appearance, attach yarn at one opening and work one round of single crochet evenly around the edge. Join with a slip stitch and fasten off.

Making up

  1. Step 1Fold the rectangle lengthwise with the right sides facing inward.
  2. Step 2Thread the yarn needle with the long tail.
  3. Step 3Use a whip stitch or mattress stitch to sew the long edge together.
  4. Step 4Turn the sleeve right side out.
  5. Step 5Slide the crochet cover onto the headset section and adjust the placement.

Notes from the pattern

  • The 3.5 mm hook is sized for sport weight or light DK cotton; a thicker or thinner hook will change the finished circumference, so test the gauge against the headset before committing to the full panel.
  • An optional stitch marker is useful for tracking the start of each row once the colour changes begin, since the alternating sc/dc pattern can make row ends harder to spot by eye.
  • Keep tension even but not tight — the fabric needs enough stretch to ease over a rounded headset section without the stitches pulling apart at the seam.
  • Change colors at the final yarn over of the previous stitch, as described for Row 4, so the stripe line sits cleanly rather than staggered or messy.
  • Gauge: 22 stitches x 12 rows = 4 inches x 4 inches (10 cm x 10 cm) in the stitch pattern. Finished size is approximately 4 inches x 2 inches (10 cm x 5 cm).

The essentials

Rounds
12
Parts
3
Level
Beginner to Easy
Time
2-3 hours
Hook
3.5 mm
Yarn
Sport

Stitches you will use

  • Alternating stitch texture Used throughout the Main Panel rows; keep sc and dc placement consistent across rows so the raised pattern lines up rather than drifting sideways.
  • Colour change within rows Happens at Row 4 when Color B is introduced; carry or weave in the dropped colour neatly so the inside of the sleeve stays smooth against the headset.
  • Seaming a flat panel into a tube Needed after the Main Panel is complete; match row ends evenly along the seam so the tube doesn't twist before fitting it over the device.

Troubleshooting

The panel curls at the edges instead of lying flat

This usually comes from working the alternating sc/dc pattern too tightly on the turning chain; loosen the first stitch of each row slightly and block the panel gently before seaming.

The finished sleeve is too loose or too tight on the headset

The 22-chain starting width is a base size for one device shape; measure the headset area first and adjust the starting chain length before working the full panel, as the pattern notes.

The edges look uneven across rows

Count stitches at the end of every row to maintain 21 stitches; losing or gaining a stitch along the way is the most common cause of uneven edges.

Substituting yarn

Lightweight acrylic, sport weight
Keeps the same hook size and finished dimensions but gives slightly less stitch definition, so the raised sc/dc texture reads a touch softer than cotton.
Cotton-acrylic blend, DK weight
Produces a marginally larger finished size at the same stitch count, so the starting chain may need to drop by a stitch or two to match the original 4 by 2 inch (10 by 5 cm) measurement.
Mercerised cotton, sport weight
Gives a firmer, slightly shinier fabric with crisper stitch definition; drape is less stretchy, so size the starting chain generously to avoid a cover that fights the headset's curve.

Washing and care

  • As a cotton-based cover, hand wash separately in cool water rather than soaking it on the headset itself; cotton holds water and can take time to dry fully.
  • Lay the sleeve flat to dry and reshape it gently by hand while damp; store it unfolded or loosely rolled so the seam and stripe lines don't crease permanently.
  • After completing the crochet headset accessory, gently shape the fabric with your hands. If needed, lightly steam block the piece while keeping the yarn fibers protected. Avoid soaking electronic accessories after assembly. If the cover becomes dusty, remove it carefully and hand wash the crochet piece separately.

FAQs

Questions

Can the sleeve be resized for a larger headset?

Yes. The 22-chain foundation gives one base size, and the pattern notes that the starting chain can be lengthened or shortened to suit a different headset measurement. Measure the area first, then adjust the chain before working the first row.

Is the Optional Edging round necessary?

No, it's optional. Working one round of single crochet around the opening tidies the raw edge and gives a slightly firmer rim, but the sleeve functions without it.

What if the finished sleeve feels too stiff to stretch over the headset?

This usually means the tension is tighter than needed for the textured sc/dc pattern. Working the next attempt with a slightly looser hand, or sizing up the hook by a fraction, should restore enough stretch.

Can leftover yarn scraps be used instead of buying two full skeins?

Yes, this is one of the reasons the project suits scrap yarn — the finished piece is only about 4 by 2 inches (10 by 5 cm) and uses roughly 25 yards (23 meters) total, so small leftover amounts of two contrasting colours are normally enough.

These answers came from whoever first published the pattern, kept word for word.